Setting Up Snowboard Bindings

When setting up your snowboard bindings, you need to keep the foot on the front foot in mind. Also, consider the board's width, angle and distance between the bindings. If you're going downhill, you'll need to set the left binding toward the tip of the board. You should store bindings separated from other snowboard gear that need to be stored.

Leaving Bindings on a Snowboard

Setting up your snowboard bindings can make the difference between a smooth ride, and frustration. There are several factors to consider, such as the angle between the front and back foot. The front foot is more likely to be in a positive stance position, while the back foot is typically in a negative stance position. Setting up your snowboard bindings to match your preferred stance position is a good way to maximize your riding comfort and minimize fatigue.

Once you know which direction the bindings should be pointing, you can loosen the screws that secure the bindings in place. Then, you can move from the regular position to the goofy position. Once you know your current stance, simply loosen the screws that attach the bindings to the baseplate.

Cleaning Bindings

Cleaning the bindings on your snowboard is an important part of maintaining a clean board. This task requires you to remove the bindings and use a soft cloth to clean them. Be sure to wipe the bindings on both sides of the board. After cleaning the bindings, you should dry the board thoroughly.

The bindings on your snowboard can become very sticky. To remove the stickiness, you can use water or cotton wool to wipe the bindings. Another effective method is to use rubbing alcohol or baking soda. To apply this mixture, you can use a cloth or a toothbrush. You can even use the brush to clean the inaccessible parts of the bindings.

Afterwards, you can apply a cleaning agent to the base of your snowboard. This solution will remove the visible crud and will also help you tune the edges of the board. You can also buy a special edge tuner that is made for snowboards. The tuner will come with instructions that will help you tune the edges of your board.

Properly Sizing Bindings

Before buying snowboard bindings, it is important to get a proper fit. To determine which size is best for you, measure from kneecap to heel. Your bindings should be a little wider than your shoulders, but not too much wider. Once you find a size that feels comfortable, mount the bindings in your reference stance. After that, you can begin to dial in the angle of your feet and adjust the binding position to match your feet and your stance.

Using the proper size snowboard boots can make a big difference in safety and comfort. Boots can vary in length and width, and bindings are often designed for a medium flex. It's also important to find the right size binding for your boot. You can do this by trying on different bindings to see if they fit correctly. Also, look for gaps between the boot and binding. If the bindings have too much overhang at the toe or heel, you probably don't have the right size.

Storage of Bindings

During the winter season, it is important to store your snowboard in a bag or different dry location, sheltered from ultraviolet light. It is best to remove bindings from the snowboard before storing it. If you have DIN bindings, you should turn them down before storing. You can also use citrus solvent to clean the base of the board.

It is also important to store the snowboard properly and bindings separated from it. If possible, store the board high up on a shelf. Then, put the bindings on a separate surface, such as underneath a bed or behind a closet door. Avoid storing them in a warm place, as the bindings can get hot from humidity.