How to Store Snowboarding Gear

Properly storing your snowboard gear means keeping it in a cool, dry place. It's also important to store your gear standing up, so you can protect the camber of the board. You should avoid storing your gear on hard surfaces, and instead choose a carpeted surface. To keep your snowboard from sagging, you can also place Styrofoam blocks under it.

Cool, Dry Place

If you want to keep your snowboard in top shape for years to come, it's best to find a cool, dry place to store it. It's also important to store it upright, which can help preserve the camber. Avoid storing your snowboard on hard surfaces, such as a garage, and instead opt for carpeted surfaces. If you're unable to do this, you can also store it on a Styrofoam block, which will provide you with a firm surface to store your snowboard.

You can store your snowboard and skis standing up or lying flat. You can also store them on their side, provided they are stored in a dry environment. A corner of your bedroom or an interior closet may be a good place to store them. Remember that they can be damaged by dampness, heat, and humidity, so find a place that's cool and dry. Basements are another good place to store your snowboard and skis.

Avoiding Water Seepage

Skis and snowboards both need to be stored in a temperature-controlled environment with little exposure to sunlight. When not in use, they should be rolled up on their sides or stored standing upright. They can also be strapped together where they naturally meet. The same principles apply to storing snowboards, but there are some important differences.

Cleaning the Edges

Cleaning the edges when you properly store snowboarding gear is a very important step to take. Make sure to use a mild cleaner that is safe to use on the board. Avoid using abrasive cleaners that can cause damage to the snowboard. Instead, you should use citrus-based cleaners that are safe for the board. In addition, you should always sharpen the edges to reduce the risk of rusting.

Once you've cleaned your skis and snowboards, make sure to keep them sharp. A scouring pad or brass, copper, bronze brush is ideal for this task. You can also use a scraper to clean the edges. Once you've done this, clean the edges with a base cleaner or mild citric solution. Then, you can apply fresh wax to the edges. Apply the wax on the edges while they're still fresh for extra protection.

Protecting the Base

The base is an important component of a snowboard. It helps the board glide better and improves the coefficient of friction between the board and the snow. There are two basic types of snowboard bases: extruded and sintered. Each one offers different performance and durability. Choosing a base based on your riding style and riding level is an important decision.

The hardness of a base is measured in grams per mole. A hardness of 4000 is considered the hardest grade. This is a more durable base than a normal sintered base.

Properly Tuning the Board

After using a board, you should tune it before storing it. This keeps the edges sharp and prevents them from dulling. If you find the edges dull, they may need to be filed back to sharpen them. Other signs of problems with a board include base wear, rocker drag-out, and stiff flexing.

Before storing your board, check for rust spots on the metal. If there is any, use a snowboarding file to remove rust from the edge. This will prevent any rust from accumulating, and it also limits the risk of damaging the board. After you tune the board, store it away in a cool, dry place.

Proper tuning and waxing your snowboard is essential to its performance and safety on the slopes. But tuning and waxing your board before storing it can also help prevent damage during the off-season. Proper storage also extends the life of your board.