How to Get Mold Out of a CamelBak

If you see some visible mold on your CamelBak, there are several ways to clean it and disinfect it. The first step is to clean it using a solution of baking soda and vinegar. Next, use a bladder brush to scrub the inner surface of the bladder. Once the cleaning process is complete, hang your CamelBak up to dry. Alternatively, you can disinfect it using a bleach solution.

Cleaning CamelBak

If you've noticed that your CamelBak has become cloudy, you should disinfect it with a chlorine-free disinfectant. Bleach is an option, but you can also use Seventh Generation's Free and Clear. For best results, wash the Camelbak thoroughly before storing it.

You can buy a cleaning kit from Camelbak. It includes a brush for the hose and a larger angled brush for the reservoir. These brushes will help remove mold and gunk. If you don't want to use a cleaning solution, you can use bleach and baking soda. Several ounces of these two products should do the trick.

You can also use a dishwasher to clean your CamelBak. You must take the water bottle apart first. Then, put it on the top rack of the dishwasher. You can also use cleaning tablets and dish soap to get rid of any stubborn mold or bacteria. Make sure to add water to the bladder before using the cleaning solution, otherwise the cleaning solution will be ineffective.

First, rinse out the bladder thoroughly. You may need to use a pipe cleaner or similar object to prop the bladder open. Next, add a small amount of bleach. The concentration of the bleach should be about 1 tablespoon for a gallon of water. After this, rinse thoroughly with fresh water.

Cleaning Visible Mold From CamelBak

You can prevent visible mold from forming on your Camelbak by cleaning the bladder after every use. You can use baking soda or bleach. Just hold the reservoir over your head while squeezing the bite valve to apply the solution. If you don't want to use bleach, you can also use lemon juice. This solution is effective at getting rid of mold, and it will also prevent future growth of bacteria.

Camelbak also makes a cleaning kit that contains a cleaning tablet and brush. It also has cleaning tabs that contain Chlorine Dioxide. However, if you're not looking to spend a lot of money, you can use household cleaning products such as bleach or baking soda instead. These are both very effective and should get the job done in about 5 minutes.

Before applying the bleach solution, you should rinse out the inside of the bladder. You should also use a bladder brush to scrub the inner surface. After the solution is out, hang the Camelbak bladder up to dry. If you still have visible mold or bacteria, you can disinfect the entire system by mixing a mixture of baking soda with lemon juice. Then, rinse it off with warm water and hang it to dry.

After rinsing out the reservoir, you can rinse it with hot water and a mild soap. You can also place your Camelbak in a dishwasher to clean it. However, you should remember to rinse the water off after every use and let it drain. It is recommended that you deep clean your CamelBak after every three or four uses.