How to Dry a Hydration Bladder Tube

There are a few different ways to dry a hydration bladder tube. You can use BonDry, scrub it with a scrub brush, or freeze it. However, the easiest way to dry a hydration bladder tube is by letting it air dry.

BonDry

If you've ever wanted to dry a hydration bladder tube or a camelbak, you've come to the right place. First of all, you must use a scrub brush to clean the bladder's cap. Many bladders now feature wide caps that make cleaning them easier.

A paper towel or absorbent cloth can be used to wipe the reservoir. After that, you should hang the tube over a horizontal bar. Some hangers have special clips to hold the tube in place while drying. Make sure you hang the tube in an area with minimal humidity. You don't want to keep the hydration system in a humid place when it's still damp.

After cleaning the hydration bladder tube, it's time to dry it. A clothes hanger or paper towel will work well. You'll also need a cleaning solution. A solution of 3-4 ounces of water should do the trick.

Using a Scrub Brush

When using a hydration bladder, it is necessary to clean the tube thoroughly before use. Most bladders have a wide cap that makes cleaning easier. However, if you do not have a scrub brush, you can clean the tube manually using your fingers. This is not ideal, but it is better than doing nothing.

You can purchase a scrub brush online. This brush can remove stubborn buildup from the inside of your hydration bladder. After removing the dirt, rinse it thoroughly with clean water. If you need to use a cleaning solution that is more effective, you can mix a solution of vinegar and water in a ratio of one to 10. You will then want to hang the bladder to dry.

Cleaning your hydration pack will remove dirt, fungus, and bacterial slime. The first step in cleaning a hydration bladder is to wash the inside of the bladder thoroughly. Use a baby-bottle brush or a long-handled foam paint brush to reach the seams of the bladder. Don't use any soap or chemical cleaner when cleaning the bladder. Usually, a simple solution of water and soap will do the trick.

Freezing Hydration Bladder Tubes

One way to prevent freezing your hydration bladder tubes is to blow out as much water as possible. This will prevent the water from freezing inside. While the freezing process won't affect the material or insulation, it can compromise the seams. For best results, fill the bladder with half as much water as it holds before freezing it.

Another option is to use a bladder with a special insulating hose. This will protect the tube from freezing even in cold climates. Cold temperatures suppress thirst, so you'll want to frequent sips of water. Blowing into the tube can also help push water back into the bladder.

A third way to prevent freezing is to use a bladder cover. These can be made from fleece or a similar material that is resistant to ice. You should always carry a bottle of water with you while hiking, and you should also keep a hydration bladder in your backpack. Changing the temperature can also help prevent freezing.

Using a Dryer

One of the most important aspects of maintaining hydration bladders is to dry them properly. Failure to dry them can cause them to develop "gunk" and taste bad. The conventional method of drying hydration bladders is to hang them from a special hanger and allow the air to circulate inside. However, frequent riders may not have the time to fully dry their bladders.

To prevent bacteria buildup, you should rinse your bladder after each use. If your bladder has a cap, you can use a scrub brush to remove any accumulated grime. To prevent the growth of bacteria, you can also freeze your bladder. You should also avoid using a dryer to dry your hydration bladder tube.

You should try to avoid using paper towels in your dryer for this purpose. This is because these can get stuck inside of the bladder, so be sure to use the lowest heat setting possible.